Stages of Installing a New Heating System

Having a new whole-house heater installed isn’t like putting in a window air conditioning unit or plugging in a space heater. There are many steps involved in the correct installation of a heater; we’ll go over the basic ones in this post. Each type of heating system will have its own particular steps, and some will take more time than others. If you’ve hired the right installers for the job, you should experience no troubles with your installation.

Design Comfort installs a variety of heating systems, from boilers to radiant floor heaters. We have the experience necessary to make your heating installation in Holladay, UT go as smoothly as possible.

Basic Heating Installation Steps

  • Selecting the new system: There are many choices for heating systems available today, all with different pros and cons. However, some systems will make better fits for your home than others, so when it comes to picking out a new heater, you’ll need the advice of professionals. This is why you should have installers involved from the beginning. They can look over your home, analyze how much heat it needs, and lay out your best options. From there, you will need to look at your long term budget plans to help you make the choice that will give you the ideal performance.
  • Sizing the system: Next, the heater must be sized to find a unit with the right amount of heating power. A system cannot be too large or too small for the space it is supposed to heat; either will cause it to drain energy and end up giving the wrong level of heating. The installers will do a heat load calculation to take into account many factors about your house and then use that information to determine the right-sized heater to do the job.
  • Removing the older heating system: When the day comes to install the new heater, the first and usually most time-consuming step is to remove your current heating system.
  • Place the new system: The installers will put the new system in place where it can access the various ductwork, pipes, power supply, etc. that it needs. Usually, the system will be bolted to the floor.
  • Make the necessary connections: The installers will now make the connections between the new heater and its distributions system (ducts, pipes) and then its power supply (electricity, gas lines).
  • Test the system: The installers won’t leave your home until they are certain your new heater operates correctly and poses no safety hazards.

Make Sure You Hire the Professionals

As these steps should make clear, heating installation is a large task that you can’t do on your own, nor should you entrust it to amateurs. For your heating installation in Holladay, UT, rely on Design Comfort. We’ve delivered quality heating since 1982.

Facebook
X/Twitter
LinkedIn
Threads
Scroll to Top